Vacuum Generators / Vacuum Pads  Vacuum generators - VRL
 

The suction port and the exhaust port are located in a straight line. The works sucked in from the suction port pass through the inside of the vacuum generator and go out of the exhaust port. Thus the vacuum generator enables conveyance of works through


Specifications
Type VRL50 VRL100 VRL200 VRL300
Fluid Admitted Air Air Air Air
Service Pressure Range at 20ºC 0~150 psi (0~1MPa) 0~150 psi (0~1MPa) 0~150 psi (0~1MPa) 0~150 psi (0~1MPa)
Vacuum Level at 73 psi (50 psi for E) -15.6 in.Hg (-53 kPa) -15.6 in.Hg (-53 kPa) -15.6 in.Hg (-53 kPa) -15.6 in.Hg (-53 kPa)
Suction Flow at 73 psi (50 psi for E) 1.8 SCFM (50 L/min ANR) 3.5 SCFM (100 L/min ANR) 7.0 SCFM (200 L/min ANR) 10.6 SCFM (300 L/min ANR)
Air Consumption at 73 psi (50 psi for E) 1.8 SCFM (50 L/min ANR) 3.5 SCFM (100 L/min ANR) 7.0 SCFM (200 L/min ANR) 10.6 SCFM (300 L/min ANR)
Max. Diameter Conveyable 0.09 in. (2.3 mm) 0.14 in. (3.6 mm) 0.21 in. (5.5 mm) 0.27 in. (7 mm)
Service Temperature Range 32~140ºF (0~60ºC) 32~140ºF (0~60ºC) 32~140ºF (0~60ºC) 32~140ºF (0~60ºC)

Models
ModelDescriptionDXF InchDXF MetricDimensions

VRL 		Union Straight A typeVRL_UA_m.zip403.pdf

VRL 		Union Straight B typeVRL_UB_m.zip403.pdf

VRL 		Straight A typeVRL_SA_m.zip401.pdf

VRL 		Straight B typeVRL_SB_m.zip402.pdf

VRL 		Straight C typeVRL_SC_m.zip402.pdf

VRL 		Straight D typeVVRL-012.DXF402.pdf

VRL 		Adaptor A typeVRL_NA_m.zip401.pdf

VRL 		Adaptor B typeVRL_NB_m.zip401.pdf

 

© 2005 Pisco USA, Inc. All rights reserved.