Fitting
Tube Fitting Mini Series
Mini-type fitting is 40% smaller than the standard type fitting.
Corresponding product
-
HNBR or FKM is used for the seal rubber material. *Some products are only compatible in the flow path.
-
No lubrication is used during assembly.
Options
-
Fluorine grease is used as grease, and the product is packaged in a clean room after cleaning with clean air.
Advantages
Mini-type fitting is 40% smaller than the standard type fitting.
Even the ultra-small size, tube can be easily connected or disconnected.
The elliptical, ultra-small release ring is employed.
Easy to press oval release ring has been adopted for Mini series since it was launched.
Round release ring for Standard series and oval for Mini series. Designed for easy operatability.
The quick-fitting joint for ultra-thin tubing is available.
Port size ø1.8 and ø2mm type is best suitable for the pipings of small actuator etc.
As for tube diameter ø1.8 and ø2mm, 16 types are prepared.
Applicable to every pneumatic piping.
Clean-room Package, best suitable for piping in cleanroom, is available. (Optional)
Fluorine grease is applied and washed by clean air, then packed in ISO class 6 cleanroom.
Specifications
Fluid medium | Air |
---|---|
Max. operating pressure | 1.0MPa |
Max. vacuum | -100kPa |
Operating temp. range | 0~60℃(No freezing) |
Port size
Tube dia.
mm size(mm) | φ1.8, φ2, φ3, φ10, φ6 |
---|---|
inch size | φ1/8", φ5/32", φ3/16", φ1/4" |
Thread size
Metric male thread | M3x0.5, M5x0.8, M6x1 |
---|---|
Taper pipe male thread | R1/8, R1/4, R3/8 |
Metric female thread | M3x0.5, M5x0.8 |
UNF thread | 10-32UNF |
NPT thread | NPT1/16, NPT1/8, NPT1/4, NPT3/8 |
Construction
Type & Price list
Thread⇔Tube connecton (11 shapes)
Used for male thread, female thread, bulkhead and concentrated branching etc.
Tube ⇔Tube connection (11 shapes)
Tube diameter size reduction, bulkhead piping, and concentrated branching are also possible.
Tube ⇔ Tube Fitting connection(6 shapes)
The angle and length of the tube outlet can be adjusted, and the size of the tube diameter can be changed.
Tube Fitting ⇔Tube Fitting connectoion(1 shape)
A tubular joint that connects joints to each other without using a tube.
Plug(2 shapes)
Block unused fittings and tubes (flow paths).
Thread & Tube connection (11 types)
Tube & Tube connection (11 types)
Tube & Fitting connection (6 types)
Fitting & Fitting connection (1 type)
Thread & Thread connection (1 type)
Plug (2 types)
Detailed Safety Instructions
Caution
1.There is no tube size indication on release ring of ø1.8mm and ø2mm. Identification between ø1.8mm and ø2mm is possible by the shape of the release-ring.
Inquiries about this product
It is also possible to suggest products suitable for various conditions such as applications and functions. Please feel free to contact us or visit the nearest sales office.
The following are frequently asked questions. Please check before making inquiries.