Fitting
Multi-Independent Port Rotating Manifold
Best suitable for piping of index tables or other rotary equipment.
Advantages
Best suitable for piping of index tables or other rotary equipment.
A single block can serve 4 circuits, 6 circuits or 8 circuits.
Make an inquiry for circuits (special made) other than above standard types to the nearest sales office.
Specifications
Fluid medium | Air |
---|---|
Max. operating pressure | 0.9MPa |
Max. vacuum | -100kPa |
Operating temp. range | 0~60℃(No freezing) |
Port size
Thread size
Metric thread | M5x0.8, M6x1 |
---|---|
Taper pipe thread | R1/8 |
Construction
Type & Price list
Detailed Safety Instructions
Caution
1.When installing Rotary Block on index table, make sure to adjust each axis (concentric of tolerance: max. 0.1mm). This product does not have any groove to fix the center positioning. Use a dial gauge to fix it. Refer to the figure below.
2.This product permits some air leakage. Do not use it for the applications which require no leakage. (tolerance of leakage: positive pressure: under 5cc/min, negative pressure: under -1.33kPa/10min)
3.Be careful not to apply excessive radial load to the rotation part by piping forcibly. It may reduce the lifetime or increase the rotary torque force.
4.Rotary torque force in the specification is the value from stable rotation when applying 0.8MPa of air pressure. Pressure change or starting time of the operation may change the rotary torque force. Note that the rotary torque force can be temporarily higher, especially when restarting after a long rest.
5.Depending on conditions, this product may not be suitable for use. Consult us.
Inquiries about this product
It is also possible to suggest products suitable for various conditions such as applications and functions. Please feel free to contact us or visit the nearest sales office.
The following are frequently asked questions. Please check before making inquiries.