Control Valve
Silencer
Silencer, connected to the exhaust port of a device, suppresses the exhaust noise.
Advantages
Silencer, connected to the exhaust port of a device, suppresses the exhaust noise.
Excellent silencing effect.
Selection from 3 types.
Selection from taper thread type, metric thread type and push-in fitting type.
Specifications
Fluid medium | Air |
---|---|
Operating pressure range | 0~0.9MPa |
Operating temperature range | 0~60℃ (No freezing) |
Port size
Tube dia.
mm size(mm) | φ4, φ6, φ8 |
---|---|
inch size | φ5/32, φ1/4, φ5/16 |
Thread size
Metric male thread | M5x0.8, M6x1, M10x1 |
---|---|
Parallel pipe male thread | G1/8, G1/4, G3/8, G1/2 |
UNF Thread | 10-32UNF |
NPT Thread | NPT1/8, NPT1/4, NPT3/8, NPT1/2 |
Resin thread is connectable to Rc female thread.
Type & Price list
Detailed Safety Instructions
Caution
1.Clogged element increases the exhaust resistance. It may cause a deterioration of the entire system due to clogging.
2.Refer to the following table for tightening the screws. Tighten the threaded body until they are slightly tight, then further tighten them using the appropriate tool on the outer hexagonal column. Knurling locknut needs to be tightened firmly by hand without using any tool. Since the main body is made of resin or the outer circumference is knurled, it may cause damage to the screws or the main body if not tightened properly.
3.If the function deteriorates due to clogging of the element, replace the unit. Note that it is not possible to replace the element only.
Inquiries about this product
It is also possible to suggest products suitable for various conditions such as applications and functions. Please feel free to contact us or visit the nearest sales office.
The following are frequently asked questions. Please check before making inquiries.