Pressure Sensor & Switch

8mm width LED Digital Pressure Sensor

RoHS2 Compliant

Ultra-small and light weighted LED Digital Pressure Sensor

Advantages

Super slim, light weight pressure sensor with a LED display.

Energy saving type which can contribute to reduction of air consumption

Use with Vacuum Generator having vacuum retention function can reduce consumption air.

Setting in a sensor (switch setting, indication setting)can be copied up to 10 sensors.

Length of cable: 4 types

Length of cable:500mm, 1000mm, 2000mm, 3000mm

Indicator font size on the LED display is 4.5mm high for better visibility.

All settings are done by 2 push buttons.

Three mounting options:Bracket, DIN rail or via screws directly.

Besides Female Thread and Push-In Fitting, Stem type is also available.

Single Port and Inline Port

Specifications

General spec.

Fluid medium Air, non-corrosive/non-flammable gas
Pressure detection Diffused metaloxide semiconductive pressure transducer
Operating temp. range 0~50°C (No freezing)
Storage temp. range -20~70°C (Atmospheric pressure,Humidity 65% RH or less) (No freezing)
Operating humidity range 35~85% RH (No dew condensation)
Vibration resistance 100m/s2
Shock resistance 150m/s2
Protective structure IEC standard IP40 equiv.
Power supply 12~24VDC ±10%, Ripple (P-P) 10% or less
Current consumption 30mA or less (all LED and no-load of 2 switch outputs: ON)
Display element "-" Sign & 2 digits,7 segments Red LED (with character height of 4.5mm)
Sampling rate 4 times/sec.
Monitor system Overpressure indication, blinking display
Panel lock function On/Off by push-button
Display/Non-display On/Off by push-button
Indication accuracy ±1% F.S. ±1 count
Temperature characteristics ±3% F.S. ±1 count (0~50°C,at Ta=25°C)
Zero point adjustment Adjustable by zero adjusting mode

Negative pressure type Pressure range

Operating pressure range -100kPa~100kPa
Proof pressure 400kPa

Compound pressure type Pressure range

Operating pressure range -100kPa~300kPa
Proof pressure 0.6MPa

Energy saving mode Negative pressure type Switch output specifications

No. of pressure setting 1 point switch output+Sol. vlv cntrl output
Switch output NPN open collector & PNP open collector
Switch capacity Max. 30VDC 80mA
Residual voltage Max. 1.2V (NPN, Load current: 80mA)/Max. 2.2V (PNP, Load current: 80mA)
Output mode (SW1) Separate mode LO operation only
Output mode (SW2) Sol. vlv cntrl output
Pressure setting range -99~0 (kPa)/.00~0.12 (MPa)
Operation indicator Output ON: LED ON (SW1: RED/SW2: GREEN)
Temperature characteristics ±5% F.S. (0~50°C, at Ta=25°C)
Repeat accuracy ±0.3%F.S.
Response Max. 1ms
Hysteresis adjustment Variable by hysteresis setting, approx.0~90kPa
Overload protection Equipped

2 points output switch output mode Negative pressure type specifications

No. of pressure setting 2 points switch output
Switch output NPN open collector&PNP open collector
Switch capacity Max. 30VDC 80mA
Residual voltage Max. 1.2V (NPN, Load current:80mA)/Max. 2.2V (PNP, Load current: 80mA)
Output mode (SW1, SW2) Separate mode, Wind comparator mode (Selectable)
Pressure setting range -99~0 (kPa)/.00~0.12 (MPa)
Operation indicator Output ON:LED ON (SW1 RED/SW2: GREEN)
Temperature characteristics ±5% F.S. (0~50℃, at Ta=25℃)
Repeat accuracy ±0.3% F.S.
Response Approx. 1, 25, 250ms (Selectable)
Hysteresis adjustment Variable by hysteresis setting, approx.0~90kPa
Overload protection Equipped

Energy saving mode Compound pressure type Switch output specifications

No. of pressure setting 1 point switch output+Sol. vlv cntrl output
Switch output NPN open collector&PNP open collector
Switch capacity Max. 30VDC 80mA
Residual voltage Max.1.2V (NPN, Load current:80mA)/Max.2.2V (PNP, Load current:80mA)
Output mode (SW1) Separate mode LO operation only
Output mode (SW2) Sol. vlv cntrl output
Pressure setting range -99~0 (kPa)/.00~0.36(MPa)
Operation indicator Output ON:LED ON (SW1:RED/SW2:GREEN)
Temperature characteristics ±5% F.S. (0~50°C, at Ta=25°C)
Repeat accuracy ±0.3% F.S.
Response Max. 1ms
Hysteresis adjustment Variable by hysteresis setting, approx. 0~90kPa
Overload protection Equipped

2-point switch outputs mode Compound pressure type output specifications

No. of pressure setting 2-point switch outputs
Switch output NPN open collector&PNP open collector
Switch capacity Max. 30VDC 80mA
Residual voltage Max.1.2V (NPN, Load current:80mA)/Max.2.2V (PNP, Load current:80mA)
Output mode (SW1, SW2) Separate mode, Wind comparator mode (Selectable)
Pressure setting range -99~0 (kPa)/.00~0.36(MPa)
Operation indicator Output ON:LED ON (SW1:RED/SW2:GREEN)
Temperature characteristics ±5%F.S. (0~50°C, at Ta=25°C)
Repeat accuracy ±0.3% F.S.
Response Approx. 1, 25, 250ms (Selectable)
Hysteresis adjustment Variable by hysteresis setting, approx. 0~90kPa
Overload protection Equipped

Port size

Tube size

mm size (mm) φ1.8, φ3, φ4

Applicable tube fitting size

mm size (mm) φ4, φ6

Thread size

Metric female thread M5x0.8

Circuit Diagram

Ordering Information

Detailed Safety Instructions

Caution

1.Do not press the setting buttons with a sharp tip. It may damage the setting buttons.

2.Do not apply excessive force to the setting buttons. It may cause damage to the button or the product itself.

3.For DIN rail mounting, use 35 mm wide DIN rails.

4.When mounting on DIN rail, install commercially available DIN rail terminal blocks on both sides of the product. Excessive vibrations and shocks may cause the product to detach from the DIN rail.

5.Do not apply excessive load to the DIN rail release lever. It may damage the release lever. In particular, when installing or removing the tube with the sensor mounted on the DIN rail, hold the unit by hand to prevent any load being applied to the release lever.

6.Do not press hard on the pressure display with your fingers. It may damage the display screen or cause the panel to come off.

7.The surface of the LED display is covered with a protective film at the time of shipment. Peel off and use as required.

Inquiries about this product

It is also possible to suggest products suitable for various conditions such as applications and functions. Please feel free to contact us or visit the nearest sales office.

The following are frequently asked questions. Please check before making inquiries.