Control Valve
Speed Controller Spatter
A fire-resistant resin (Equivalent to UL V-0) is applied for the body material to adapt to spatter environment.
Protective Cover at both needle and joint parts to protect from sparks.
Specifications
Check valve specification:Standard
Fluid medium | Air |
---|---|
Operating pressure range | 0.1~0.9MPa |
Check valve opening pressure | 0.05MPa |
Operating temp. range | 0~60℃ (No freezing) |
Check valve specification:Low opening pressure type
Fluid medium | Air |
---|---|
Operating pressure range | 0.05~0.5MPa |
Check valve opening pressure | 0.02MPa |
Operating temp. range | 0~60℃ (No freezing) |
Port size
Tube dia.
mm size(mm) | φ4, φ6, φ8, φ10, φ12 |
---|
Thread size
Metric male thread | M5x0.8 |
---|---|
Taper pipe male thread | R1/8, R1/4, R3/8, R1/2 |
Flow Characteristic Graph
Type & Price list
Detailed Safety Instructions
Warning
1.To adjust the speed of the actuator, gradually turn the needle from the fully closed position to increase the air volume. If the needle is open, there is a risk of the actuator move suddenly and violently. Turning the needle clockwise closes the valve, while turning it counter-clockwise opens it.
2.When adjusting the flow rate of the equipment, the needle should be turned to open gradually from the fully closed position. If the needle is in open position, a high flow rate will be instantly applied to the equipment and there is a risk of damage to it.
Caution
1.Leakage is allowed for the control flow even when the needle is fully closed position and should not be used in such a way that zero leakage is required.
2.Always fit the cover after adjusting the actuator speed. Spark and molten residue can cause operating problems.
3.When using Anti-spatter Tube, cut the outer cover tube to the specified size (see following table) Cutting outside of the specified dimensions may cause the tube to come loose, leak, or cannot be inserted properly. * Anti-spatter Tube Cover Peeler (TSC) makes it easy to peel the cover.
Inquiries about this product
It is also possible to suggest products suitable for various conditions such as applications and functions. Please feel free to contact us or visit the nearest sales office.
The following are frequently asked questions. Please check before making inquiries.